Change LEDs Between LEDs Using OneShield

Introduction: Change LEDs Between LEDs Using OneShield

when you press on a key green led turn on

and when you press to another

key red led turn on and other will be off

and so on


Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Buy OneShield

*one-Shield

you can buy from this web

http://1sheeld.com/

Step 2: LEDs

get LEDs different colors

RED

GREEN

YELLOW

WHITE

Step 3: Get Wires

jumper wires

Step 4: Connection

connect LEDs with

Pins 8, 9, 10, 11 in arduino

Step 5: SCHEMATICS

connect LEDs as shown

Step 6: Install One-shield App From Store and Connect to Board

install one-shield App from Store and connect to Board

for more info go to

link: http://1sheeld.com/tutorials/getting-started/

upload code on board Choose Keypad

Step 7:

When you press button A yellow LED will on

When you press button B green LED will on

When you press button C White LED will on

When you press button D Red LED will on

Step 8: Upload Code

go to code here >>>

code of project

Be the First to Share

    Recommendations

    • Backyard Contest

      Backyard Contest
    • Silly Hats Speed Challenge

      Silly Hats Speed Challenge
    • Finish It Already Speed Challenge

      Finish It Already Speed Challenge

    2 Discussions

    0
    Ahmed SolimanE
    Ahmed SolimanE

    Reply 4 years ago

    Thanks