Christmas Bowls

Intro: Christmas Bowls

These are two bowls I made for a Christmas present..  Both are Maple burl.  I used the shop lathe and polished them with 600 grit wet dry.  Once done with that I used General Finishes Salad Bowl Finish.  After each coat I would buff with 000 steel wool.  Then let them dry for 72 hours.

Share

    Recommendations

    • Electronics Tips & Tricks Challenge

      Electronics Tips & Tricks Challenge
    • Audio Contest 2018

      Audio Contest 2018
    • Plastics Contest

      Plastics Contest

    2 Discussions

    0
    None

    Nice work, but it would be good if you included some instruction in the instructable.