Cigar AshTray (3D Print)

Introduction: Cigar AshTray (3D Print)

About: Engineer who loves to build, invent, and learn through failing.

Welcome. This is my first posted Instructables so forgive me for how poorly it is laid out. I hope everyone enjoys this design while they smoke a delicious cigar of their choice. Enjoy!

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Download & Save

Download & Save file

Step 2: Open in 3D Printing Software and Set Parameters (I Used Cura)

Open in software and position tray correctly. I highly suggest printing from the bottom up, as this will minimize supports.

I used PLA but I would love to see how it works using different materials.

I added words to the top extruded into the material, but it did not come out well. Just poorly placed. (Thanks Creo).

Used a print pad and this was very hard to get off. Heated plate up to 90C and pried it up. It was stuck.

This design holds every size cigar perfect. Perfect for those Churchill's.

Be the First to Share


    • Sculpting Challenge

      Sculpting Challenge
    • 3D Printed Contest

      3D Printed Contest
    • Motor Vehicle Contest

      Motor Vehicle Contest


    Nice. There is no end to the number of things that a 3D printer can improve.