Introduction: Class Computer Build
First things first, gather your materials and prepare your work station.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Once you have your motherboard out, insert the CPU and RAM very carefully so as not to damage the CPU pins.
When preparing to screw in the motherboard you will need to first find where the screw will go in the case.
After carefully inserting the RAM and CPU, attach the fan on top of the CPU, and insert the IOS shield after screwing in the motherboard inside the case
Once the motherboard and the fan are installed all that is left is to install the driver which is shown in the right of this picture.
Make sure that the driver that you are using is compatible with the case and will fit and not be loose or too tight.
Then all you do is seal up the case and you're done.