Introduction: Make It - Coat Rack
Building a Coat Rack with a couple shelves for storage.
This was made from some left over pieces of 3/4" Walnut Plywood I had from a previous project so I was working with certain limitations. The "hooks" are made from 1/2" brass rod. It will get mounted on the wall with drywall anchors and brass screws.
—8" Amana Dado Stack - http://www.toolstoday.com
—Titebond Glue - http://amzn.to/1TmiBAs
—Glue Bottle - http://amzn.to/1SirgW7
—Watco Danish Oil - http://amzn.to/1WKqWBX
—Brass Rod - http://amzn.to/1VH2iTK
—Masking Tape - http://amzn.to/1WKrsQq
—Two Sided Tape - http://amzn.to/214pudJ
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Participated in the
Home Hacks Challenge