Cold Casting Metallic Powders

About: One day I shall own a Delorean.

Cold casting metallic powders is something a lot of people want to know how to do, the old school way of doing it was to use metal powders mixed with the resin or done in the same way as this video. then you polish the surface to remove a little bit of resin and shine the metal underneath. this method uses powders I got from smooth on and also powders I got from ebay so I can compare the 2 finishes. Obviously outside the US the ebay powders are cheaper but are they as good? we find out in this video.

Materials used in this video are as follows

Polycraft Silicone

bondit silicone release spray

Polycraft Black Polyurethane Casting Resin

Smoothon Cast Magic Gold Finger

Smoothon Cast Magic silver bullet

Ebay Powders came from Killablitz who have their own website

I use a silicone two part mould in this video and you can find out how that was made by clicking here.

Share

    Recommendations

    • Growing Beyond Earth Maker Contest

      Growing Beyond Earth Maker Contest
    • Backyard Contest

      Backyard Contest
    • Sensors Contest

      Sensors Contest

    Discussions

    0
    None
    Swansong

    1 year ago

    Hello there!

    We're glad you want to share something with the Instructables community!

    And we’re here to help you out.

    Due to some recent changes on the site, we are no longer able to publish stand-alone videos and other forms of incomplete posts. In order to be published live on the site, Instructables must consist of the following things:

    - Multiple steps showing how you made your project

    - Written instructions in each step

    - Your own original images

    Beyond making your Instructable simply publishable, this guide (https://www.instructables.com/id/How-to-Create-a-Feature-Worthy-Instructable/) explains what is required to have your Instructables featured by our site editors. It’s very helpful, and definitely worth checking out.

    We would love to review your project again after you have made the necessary edits, and we will publish your project if it is eligible.

    If you have any questions, please feel free to ask right here or send us an email at service@instructables.com.

    Best,

    Instructables Community Manager