Introduction: Connection Box
a connection box can be made very easily. its used to keep many wires in one place and organized!!!!
materials: shoe box paints and paint brushes an extention cord a sharpie chargers
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
STEP ONE: FIRST, GET YOUR SHOEBOX AND PAINT/DECORATE IT. MAKE SURE TO GIVE EVERYTHING COLOR TO MAKE IT LOOK NICE.
STEP TWO: AFETR YOUR DONE DECORATING OR PAINTING CUT 4 HOLES OUT OF THE BOX WITH AN EXACTO KNIFE. BE CAREFUL! CUT THREE IN THE FRONT AND I IN THE BACK.
STEP 3: NEXT STICK YOUR EXTENTION CORD INSIDE YOUR BOX. THEN CONNECT YOUR CHARGES IN THE CORD AND LET THE CHARGER WIERS STICK OUT OF THE THREE HOLES IN THE FRONT.
ALSO PUT THE CONNECTION FOR THE EXTENCTION CORD OUT THE BACK HOLE.
A MAYBE STEP IF YOUR CORD IS NOT STRAIT GET "BREAD TIE" AND POKE A HOLE IN THE SIDE OF THE HOLE IN THE BACK AND RAP IT AROUND THE CORD TO KEEP IT IN PLACE.
in the end your box should look like this...... (an example)