This is a project to become familiar the Intel Edison and Intel Arduino expansion board.
In the meantime I finally learned some Python code.
It has been a while since I have used Linux and now I had to do it without a Gui Window front end and no mc (midnight commander.) I used vi and MobiXterm to program the following python Example.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Attach Sensors to Intel Ardunio Expansion
Attached button switch to D3 - Digital I/O 3
Attached LED module to D4 - Digital I/O 4
Attached Buzzer to D8 - Digital I/O 8
Attached LCD panel to I2C0
Attached Potentiometer to A4 - Analog 0
Attached Light Sensor to A1 - Analog 1
Attached Temperature Sensor to A2 - Analog 2
Step 2: Python Program to Run Example
I saved the attached program in /home/root/python
# python lcdbuz.py
The program will wait till you touch the button.
Next it read the temp, light sensor and potentiometer values
It will print the out on the LCD panel and console.
If you twist the potentiometer it will change to color on the LCD display