Converting RC Touring Tires Into Drift Tires With Plastic Cup

Introduction: Converting RC Touring Tires Into Drift Tires With Plastic Cup

Drift rc wheel is very expensive, but if you can convert your standard touring tires into drift tires by using electricity tape or plastic cup.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: The Tools

You need
1. RC car
2. 4 Plastic cups
3. Scissors/cutter
4. Screwdriver to take off the wheel.

Step 2: Take of the Tires and Put Into the Plastic Cup

Take of the tires of your rc one by one and put into the plastic cup. Press the wheel until it tighten up so the wheel won't slip out from the plastic cup.

Step 3: Cut the Plastic Cup

Cut the plastic cup as wide as your wheel and make sure it won't slip out when the wheel in contact with the track. Repeat the second to third instruction for yhe other wheels.

Step 4: Put Back the Wheel.

Put back the wheels and your touring RC is ready for drifting. Thank you very much and sorry for my bad english :9

Be the First to Share

    Recommendations

    • Cardboard Speed Challenge

      Cardboard Speed Challenge
    • Indoor Plants Challenge

      Indoor Plants Challenge
    • Sculpting Challenge

      Sculpting Challenge

    3 Discussions

    0
    SEKTHEBOSS
    SEKTHEBOSS

    4 years ago

    cool stooky fizz pop waffles with plastic dinosaurs on top

    !!!!!!!

    0
    seamster
    seamster

    4 years ago on Introduction

    This is a pretty slick idea! :)

    I'd love to see a video of your car in action.

    0
    FajarPradipta
    FajarPradipta

    Reply 4 years ago

    Thanks! I'll make it tommorow