In this tutorial, You will learn how to Easily convert a book into a cool business card stand.
This diy visit card holder, or diy business card holder, is a very cool and unique idea for your business, it will ensure your clients easily take more of your business cards, coupons, maps or flyers, and it will help bring more clients your way!
I hope you find this DIY business card holder display stand tutorial easy and helpful and as Always: Enjoy & Subscribe!
Support Me For Free by checking out these Shops
Tools and Materials I used
My Video shooting Hardware
Software I use
OS : Linux Mint
Video Editor : OpenShot
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Cut Out a Cardboard Bottom
Open the book you chose for this project, and measure its sides, then remove 1 cm (or 1/4 inch) from each side and cut out a cardboard rectangular bottom of those dimensions.
I.e : if the book dimensions are 20 x 16, the your cardboard rectangle will be 19 x 15.
This will make the book stay open, and give the stand the impression that it is floating or hovering on the desk.
Step 2: Glue the Bottom to the Book
Measure the middle of the cardboard rectangle, and start gluing the book onto it from there outwards!
Remember that our bottom is smaller than the book, so starting from the center is necessary!
Step 3: Fold the Pages
Check out how long your business cards you want to put in the stand are, and choose how much of a page you want to fold.. you don't want to choose very long pages, because the cards would sink into them and won't be very visible.
I chose a small book for this project, with not so wide pages, so that when folded, as you will see later, the cards will be half visible.
Step 4: Cover Up the Inside of the Book Cover If Necessary
This step is optional and depends on the book you chose.
Mine had some irrelevant drawings on its first and last page, so they had to be hidden.
For that I simply cut out and glued white pages on them and it was solved.
Step 5: The Result
Place your cards in the stand, and You are done.
You can get creative and place them in patterns, vertically, horizontally, or any other way you like :).
This DIY business card stand can also be used to display coupons, visit cards,city maps, flyers or any other information you would like to distribute to your clients, and will look wonderful on a reception desk or on a hallway table, in a small bed and breakfast, clinic or library !!
Thank you for reading my article, I hope this inspired you to make your own Visit Card holder, and as always, Subscribe to My Youtube Channel to Stay Up-To-Date on My Cool and Original Projects!
Participated in the