Intro: Cork Bottle Wraps | Wine Labels
This week, we're making cork bottle wraps or unique wine bottle labels using our Speedy 300 laser engraving machine.
We're using our 0.8mm cork board to laser engrave graffiti-themed labels. We then simply peal off the 3M adhesive and place them on our bottles.
You're not only limited to wine bottles, you can do any types of cubs, glasses, coffee mugs, yoga bottles and more!
Step 1: Engrave the Labels
We put our 0.8mm Cork sheet into our Speedy 300 100w laser engraver.
We engrave our design which is RGB black fill in our artwork file.
Laser Settings: 80 power, 100 speed
Step 2: Cut the Labels
Our laser then automatically starts cutting the label based on the RGB Red hairline outline in our artwork file.
Laser Settings: 60 power, 1.2 speed
Step 3: Wrapping the Bottles
We then simply take our 3M adhesive cover and wrap the bottles with the cork.
Step 4: And You're Done!
The cork sheets are 36" x 12" in size and come in 4 thicknesses: 0.8mm, 1.5mm, 3mm, 6mm.
If you'd like to purchase them please click here: https://www.engraving-supplies.ca/engravable-wood/...