Introduction: Cra-z-loom Fishtail Braclet Tutorial
In this tutorial I will show you how to make a Cra-Z-Loom fishtail braclet! This will only involve 2 pegs on your loom!
Step 1: Step 1:
First get your loom and hook
Step 2: Step 2:
Choose your colors, in this case I'm using 2.
(The yellow doesn't look neon on the camera sorry! :( )
Step 4: Step 4:
Put one rubber band on two pegs and make an "eight".
Step 6: Step 6:
Put the next color on just normally.
Step 8: Step 8:
Put the next color normally on your 2 pegs.
Step 11: Step 11:
Take the bottom rubber band and pull it up and over the peg.
Step 14: Step 14:
Repeat with the other end.
Step 15: Step 15:
Step 19: Step 19:
Pull the bottom
Step 20: Step 20:
Repeat these steps and come back to see how to finish it off! :)
Step 26: Step 21:
Take it off by sliding the bands off the pegs and taking out the two extra bands. Connect with the "S" clip.
Step 27: Last Step: