Created by Thunder Laser.How to Make a Trojan Horse?

To make a wooden horse, the design drawing is very important, we can design the wooden horse according to the user of characteristics. Firstly, measure the user's height, then draw up a blueprint, which can add some original elements, For example, for children, we can add some interesting small animal patterns.

Step 1: Bill of Materials:

A laser cutter: Nova35（80wat）

plywood

Step 2: Setting Parameters：

Processing Mode: cut

Speed: 20mm/s

Max power: 60%

Min power: 70%

After we design the file in CorelDraw, we send the file to laser software directly by clicking the laser plug-in. Then we input the best setting parameters and “Download” the file to the laser cutter.

Step 3: Start Cutting：

Place the wood sheet on the machine working table, move the laser head to the right start position, adjust the focal distance, press “Origin” button to set the starting point, then press “Start” to run the job.

Step 4: Assemble(finished):

After the laser cutter finish working, Assembly is

the most important part of make the wooden horse, it will not only test your proficiency, but also test your ability to assemble. This step requires us have mind with no arrogant and rash to assemble.

The magic weapon of the successful assemble are the patience and the mind with no arrogant and rash. Firstly, we can assemble a general framework, and then assemble other parts in detail.

Step 5: Work Show:

A wooden horse is a very special toy, its design concept is relatively

humanized, to ensure the safety of children and to give children a comfortable experience. The wooden horse made by laser cutting machine has been finished, let’s making a wooden horse by ourselves and regaining good of your childhood!