Crocs - the 'Rip Repair' Remix

About: yay!!!

These are hands down the most comfortable shoes I've ever owned.

The design on this particular pair of Crocs is awful, and I am really rough on footwear. Hence, I blew threw this pair in literally one day.

Supplies:

-Gorilla Glue Gel Super Glue

-Masking tape

-Hot glue gun

-Hand lotion (optional)

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Getting Down and Dirty

-Tack back together with Gorilla Glue Gel Super Glue to maintain the original shape (this can probably be skipped if you the rip does not affect the original shape, or if you are using this guide to fill in the holes that are pre-formed)

-Put masking tape on the inside where your foot goes so the hot glue gun glue doesn't all run inside where you don't want it to be

-Dripple in hot glue gun glue without bumping the tip on the Crocs themselves too much (doing so may melt where it bumps as hot glue guns are hot)

-Wait until cooled completely

-Remove masking tape

-Rub in a dollop of hand lotion where the masking tape was if masking tape leaves the Croc sticky

Step 2: Rock Out With Your Crocs Out

Beautiful...? The functionality/integrity of them sure is!!!!!!!!!

Be the First to Share

    Recommendations

    • CNC Contest

      CNC Contest
    • Teacher Contest

      Teacher Contest
    • Maps Challenge

      Maps Challenge

    Discussions