Customized Corn Hole

697

15

4

I made Custom Corn Hole boards using my Kreg Jig and made them 2'x3'. Regulation size is 2'x4' but making them smaller makes it easier to pack them up for travel. I made the frame for the base using 1"x3" boards and cutting them to size. I used the Kreg Jig to make the pocket holes so there would be almost seamless joints. Also so there wouldn't be visible nails or screws.

I used a 6" hole saw I purchased from Amazon for $20 for a perfect hole. I then taped the stripes using 2" frog tape for 1 board and used star stickers for the other board. Used weathered gray stain and allowed to dry. Once dry I removed the tape and stickers. Followed by a clear coat to protect from the abuse from the game.

Share

    Recommendations

    • Arduino Contest 2019

      Arduino Contest 2019
    • Trash to Treasure

      Trash to Treasure
    • Tape Contest

      Tape Contest

    4 Discussions

    0
    None
    livichris

    2 years ago

    for non US readers tell us about the game please

    1 reply
    0
    None
    Penolopy Bulnick

    2 years ago

    I haven't seen this game in forever! Glad to see people are still playing it :)