DIY 3D PRINTER VERSION 2 CODE NAME 3D UNIVERS

Introduction: DIY 3D PRINTER VERSION 2 CODE NAME 3D UNIVERS

This is how i will convert the first version of my 3d printer in to the second version.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1:

At the beginning the idea was to build a cnc router.

Step 2:

Here was the finishing of the cnc router build.

Step 3:

Here is how i convert my cnc router in to a 3d printer.

Because the cnc router have making a lot of noise i decided to convert hem in to a 3d printer. This was the first version of my 3d printer witch i called 3D UNIVERS VERSION 1.

Step 4:

So i bought LM10UU linear ball bearings.

Step 5:

Shaft coupler 5mm to 8mm flexible coupling.

Step 6:

Anycubic ultrabase heated bed and glass plate.

Step 7:

M5 thread t nut for 3030 aluminium profiles.

Step 8:

Usongshine stepping motor 17HS4401S .

Step 9:

Magnetic print bed tape for 3d printers.

Step 10:

This is how i mount the magnetic bed tape.

Step 11:

This is the first print on the magnetic bed tape.

Step 12:

12v 30A 360W power supply

Step 13:

This is how i mounted the power supply.

Step 14:

I have printed bracket for 3030 aluminium profiles.

Step 15:

I have printed T slot L type for M5 screw for my diy 3d printer.

Step 16:

I have printed another type of brackets for 3030 aluminium profiles.

Step 17:

This is the mounting of 3030 aluminium extrusion profiles parts with T slot L type 90 degree connector brackets and 3030 corner angle brackets.

Step 18:

I designed an shaft support for 10 mm rod and 3030 aluminium extrusion profile.

Step 19:

Here is how i mounted the LM10UU bearings in the 3d printed bearing housing.

Be the First to Share

    Recommendations

    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Rope & String Speed Challenge

      Rope & String Speed Challenge
    • Wearables Contest

      Wearables Contest

    Discussions