DIY - Adjustable Roller Stand From Scrap

Published

Introduction: DIY - Adjustable Roller Stand From Scrap

In my hobby sometimes I need cut or drilled long pieces.

I Make this roller stand for helping me.

For this, I used some scrap material:

  1. Old Disc brake

  2. part of "Dress Stand"

  3. Print Roller

  4. Strip of rubber

  5. a piece of Aluminum's bar

  6. Some pieces of metal

Step 1: Make IT

On the lathe, I make the disc adapter.

On the hydraulic press, I put the adapter in the disc then put the bar of dress stand in the adapter.

On the top, I weld some pieces of metal to build the support of roll bar.

The roller is removable if you want a stable support.

Share

    Recommendations

    • Water Contest

      Water Contest
    • Creative Misuse Contest

      Creative Misuse Contest
    • Oil Contest

      Oil Contest

    Discussions