DIY Arduino Robotic Arm , Step by Step

About: i'm a Arduino programer beginner

These tutorial is teach you how to build a Robot Arm by yourself

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Cutting Piece That Hold the Servo

- cutting the first piece : 6cm width , 10cm Height using mini dremel .

- use hot air gun to flex the plastic .

- cut about 1 cm from each side to put the servo inside the first piece .

Step 2: Install the Servo With Screws Inside the Plastic Piece

- Make four holes in the piece of plastic for the screws .

- Place the motor and install it with screws

Step 3: Making the U Plastic Piece

- cutting 2 piece : 6cm width , 10cm Height using mini dremel .
- use hot air gun to flex the plastic .

- Attach it with the first piece with screw ,

Step 4: Put the Servo Horn and Screw It

Step 5: Attach the First Piece We Have Made With a Piece of Plastic

Step 6: Getting Everything Together

Step 7: Coding

Step 8: Circuit Schematic

Circuit Chamtic

Includes Fritzing file

Step 9: Testing

Test the Robot Arm

Be the First to Share

    Recommendations

    • Made with Math Contest

      Made with Math Contest
    • Multi-Discipline Contest

      Multi-Discipline Contest
    • Robotics Contest

      Robotics Contest

    Discussions