DIY Badminton Birdie

If you do not have a birdie this might be useful.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Tools & Materials

Tools: scissors, pencil, ruler, red or scarlet crayon

Materials: printer paper (white), Scotch tape, yarn(white), beans

Step 2:

Cut out a 8" by 8" square with a 2" by 2" red square in the middle. Fold with the red spot showing from right to left, and then, unfold. Repeat folding top to bottom. Next, fold with the the red spot NOT showing from top right corner to the bottom left corner, and then unfold. Repeat folding the top left corner to the bottom right corner.

Step 3: Put the Beans in the Birdie

Make sure the red dot is not showing. Put a few beans onto the birdie. (SIMPLEST STEP EVER)

Step 4: String It

Take a 6" long piece of yarn and make the front of the birdie and tie up the front.(MAKE SURE THE FRONT IS RED)

Step 5: Almost Done

Tape up the front of the birdie so that it has whack resistance.

Step 6: Finished

now that you're done here are some notes: this is my fist instructible. The birdie is NOT waterproof. cannot be aimed in wind.

Now you can go out back and play Badminton!

Be the First to Share

    Recommendations

    • Skateboard Contest

      Skateboard Contest
    • Make it Move

      Make it Move
    • Teacher Contest

      Teacher Contest

    Discussions

    Nice little build, especially to replace something that is probably easily lost. Thanks for sharing!