DIY CLOTHES PEGS (recycled, Easy, Fast)

6,787

31

6

Introduction: DIY CLOTHES PEGS (recycled, Easy, Fast)

This is how I made my clothespins, with used chopstick.
But if you re out camping you can use pieces of STICKS. (IT WILL BE REALLY USEFUL IN WINDY DAY!!!!!).
or you can use garden cane.
You can adjust the rubber ring ones you have hang your clothes.


Step 1: WHAT YOU NEED

YOU NEED:
-used chopstick (or collect little sticks of wood, long 3 inches and half);
-bicycle inner tube (cut in rings)

TOOLS:
-scissors;
-knive (or little saw).

Step 2: CUT CHOPSTICK IN HALF

Cut chopstick in half! Or go collect pieces of sticks, long 3 inches.

Step 3: PLACE RUBBERS RINGS

1-cut bicycle inner tube in rings, NOT TOO THIN.
2-put two sticks together, wrap around one edge a ring of inner tube, REALLY FIRM.  (see picture).
3-wrap another ring in the middle of the 2 sticks, firm, but not too too tight (so it will allowed clothes to fit between the 2 stick).
          
   DONE!

Share

    Recommendations

    • Water Contest

      Water Contest
    • Metalworking Contest

      Metalworking Contest
    • Fix It! Contest

      Fix It! Contest

    6 Discussions

    well done! I like the idea... simple and sustainable. minor fix... "recycled" is spelled with an e not an i. :-) thanks for a nice, practical instructable.

    2 replies