DIY Camera Dolly Rails for Actionpro X7, GoPro or Any Other Action or Video Camera.

2,356

24

6

Introduction: DIY Camera Dolly Rails for Actionpro X7, GoPro or Any Other Action or Video Camera.

Parts, tools and all activities required to make your own Camera Dolly for your actioncamera like GoPro, Actionpro or any other video camera / DSLR that support standard tripod conector. Camera can be attached directly on the Dolly or attached to a tripod head. The last one is the best option as will allow quick camera repositioning.

The actual name of this is Table Dolly, as it is a small one and not really a full size Dolly, but this is an essential part that can be turned with minimum effort to a slider or tripod slider. DIY clip for this kind of transformation will come later.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Be the First to Share

    Recommendations

    • Backyard Contest

      Backyard Contest
    • Silly Hats Speed Challenge

      Silly Hats Speed Challenge
    • Arduino Contest 2020

      Arduino Contest 2020

    6 Discussions

    0
    mgkbull
    mgkbull

    4 years ago

    What size wheels are those?

    0
    Ninjutzu
    Ninjutzu

    Reply 3 years ago

    Sorry for late reply. They are just ordinary Rollerblade wheels purchased on discount from a sport shop.

    0
    Ninjutzu
    Ninjutzu

    Reply 5 years ago on Introduction

    Thank you for your comment.
    Not sure about looking but it is stable and does the job ;-)

    0
    seamster
    seamster

    Reply 5 years ago on Introduction

    My wife says the same about me. bah dum pshhhh!