Introduction: DIY Christmas Decoration - Fairy Lights Bottle Wall Hanging
DIY Christmas Decoration - Fairy Lights Bottle Wall Hanging
In this tutorial i will show you how to create a DIY Christmas Decoration super easy.
plastic bottle, fairy lights, Christmas balls and berries
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Mark Bottle Cover
Use anything sharp and scratch/ mark the outside and inside of the bottle cover. The is to make the surface rough to hold the glue that will be applied later.
Step 2: Tie Yard Onto Bottle Neck
Tie cotton yarn or wool around the neck to allow for the decoration to hang. Ensure that your ties are made in the center of the bottle on sides.
Step 3: Paste Yard Onto Bottle Cover
Using a glue gun paste a piece of yarn around the cover.
Step 4: Attach Foam to Cover
Using the glue gun paste on a piece of foam.
Step 5: Paste Christmas Balls Onto Cover
Paste on different size balls with different finishes.
Step 6: Add Berries
Add your berries as a filler in areas where the foam is still visible.
Step 7: Place Fairy Lights Into Bottle
Unwrapped a roll of battery powered LED fairy lights and place them into the bottle. Paste the controller on the inside of the cover.
Step 8: Complete Decoration
Screw your cover back onto the bottle to complete.
Participated in the
Home Decor Contest