Introduction: DIY Desk Whiteboard
Step by step guide explaining how to form a desktop whiteboard surface
Step 1: What You Will Need:
Electric Tape (For an optional border)
Whiteboard/Dry Wipe Pen(s)
Sticky back plastic
Step 2: Cutting to Size
Decide how large you wish to make your whiteboard surface, and measure accordingly onto a sheet of sticky back plastic
Step 3: Lay the Tape Onto the Desk
Being careful to erase any air bubbles, lay your tape onto your desk, (sticky side down).
Step 4: (Optional) Border
Use electric tape (or washi tape), to form a border to your tape. This will hide any rough edges.
Step 5: That's It!
Write and wipe away on your dry wipe surface!