DIY Free Ferrofluid (low-quality)

Published

Introduction: DIY Free Ferrofluid (low-quality)

In this instrctable I will show you how to make free low-quality ferrofluid . A ferrofluid  is a liquid which becomes strongly magnetized in the presence of a magnetic field.

Step 1: Materials

What you will need :

- some rust 
- a cup
- some oil 
- stong magnets ( you can obtain those from a dead HDD )

Step 2: Dry Ferrofluid

Pour the rust into the cup. Crush it with a rod of metal until it turns into a dust. Now you made yourself dry ferrofluid.

Step 3: Finishing

In the cup with the rust dust put some oil until it is oil-like , but not too dense because it could not work. Now , put the magnet at the bottom of the cup (so the ferrofluid will stay at the bottom) and pour out the extra liquid.

Step 4: Last Words

THIS IS MY FIRST INSTRUCTABLE . TELL ME IF YOU LIKED IT .SORRY FOR THE FERROFLUID'S LOW QUALITY , I WILL MAKE A BATTER ONE AND MAKE ANOTHER INSTRUCTABLE.

DISCLAIMER : I MADE THIS RECIPE LAST NIGHT SO IT'S MY OWN , I DIDN'T COPIED IT FROM ANY OTHER SITE. SORRY FOR MY BAD ENGLISH :D

Share

    Recommendations

    • BBQ Showdown Challenge

      BBQ Showdown Challenge
    • Oil Contest

      Oil Contest
    • Creative Misuse Contest

      Creative Misuse Contest

    3 Discussions

    cool. could do a video or something?

    cool. could do a video or something?