Introduction: DIY Heart Luminarie
DIY Cute Heart Luminarie♥
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: DIY Heart Luminarie
Small Paint Brush
Small glass of water
Paper heart Template
Variety of Tissue paper colors
And a Empty Candle holder♥
Step 2: Tissue Paper Hearts Cut Out
It explains itself.
Cut a bunch of hearts out with scissors. With the template behind the tissue paper:-D
(Or if you have one of the stamp cutters use that- ;-)
Enough to cover the whole candle holder♥
Step 3: Mix Glue and Paint Onto Glass
Mix equal parts of modge podge in the water until you get a thinner version of glue.
Just until its thick enough but not too thin. You will know its thin enough when it easily spreads on the candle holder;)
Tip DONT put to much water in the Modge Podge or it will be to thin.
Step 4: Apply Tissue Paper Hearts♥♥
Apply your tissue paper hearts.
Use a small paint brush and Paint a thin layer of glue on the Candle Holder. Apply your hearts in a pattern. Then paint another layer on after you have finished a couple of lines:-)
Step 5: Let It Dry!
After completly covering your Candle holder/container. Let it completely dry. It takes about an 1 hour or so.
Once dry you can see your Heart Luminaries shine!♥☼►♫
Step 6: DIY Heart Luminarie!
Put a small candle in the candle holder. Then lite it........TA dAAAAA!☼☼♫ You now have a beautiful luminary!
I will post more instrucables soon! Enjoy, And happy crafting♥