Introduction: DIY Leopard Heart Tank Top
Step 1: Materials
-Plain white tank (I bought this at Old Navy for $5.99 on clearance). -black lace material -Leopard material -two heart cut-outs, one bigger than the other (can find on google and just print out) -black and gold thread -needle -scissors -pins - gold elastic sequins strip
Step 2: Pin 1
Pin larger heart cut-out to a doubled over black piece of lace. This will result in two black lace heart cut-outs to make for a thicker look.
Step 3: Cut 1
Cut out black lace hearts around heart
Step 4: Two Black Lace Hearts
Step 5: Prepare First Sew
Use black needle and thread
Step 6: Sew 1
Sew two black lace hearts together in the center, just to make them easier to work with.
Step 7: Pin 2
Pin smaller heart cut-out to leopard material
Step 8: Cut 2
Cut out leopard heart
Step 9: Sew Hearts Together
Sew leopard print heart to black lace hearts. I chose to hand sew this by hand, but you may use a sewing machine.
Step 10: Shirt Time
Get your white tank
Step 11: Sew Black Heart to Shirt
I also sewed this on by hand, but once again it is up to you if you prefer a machine. I've had some struggles with sewing lace using my machine, but experienced sewers should have no problem.
Step 12: Sew on Sequins
I hand-sewed the sequins to the shirt around the black lace, leaving room to reveal the black lace heart. Tip: don't cut the sequins strip until finished sewing it to the shirt.
Step 13: Finished Project
Step 14: Big Reveal
One new shirt added to your closet
Step 15: Rock It
Hope you enjoyed!