DIY Mini Pallet Drink Coasters

7,117

235

13

Introduction: DIY Mini Pallet Drink Coasters

The woodworkers drink coasters. Easy to make and cute.

Tools and Materials:

  • Band saw
  • Tape Measure
  • Pencil
  • Glue
  • Some clamps
  • Hand saw or mitre box


Here is a video of the making proccess:

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Prepare the Wood

For this project I have used some scrap pieces of pine.

Cut 9 strips of wood 60 x 1.3 x 0.3 cm on the band saw. Once you have done that take 2 strips and cut out 15 pieces with 8.0 cm length.

Now take another piece of wood and cut out a few strips 1.3 x 1.3 cm. From those strips cut 12 pieces 3 x 1.3 x 1.3 cm and21 pieces 1.3 x 1.3 x 1.3 cm.

Step 2: Assembly

Glue all the pieces together as shown on the pictures. A basic pattern is shown on the first picture. Lastly use some clamps to apply some pressure on the pieces as long as the glue sets.

Step 3: Finishing

Now cut the Coasters every 11.5cm.

Your coasters are now ready.

Have fun and take care!

Be the First to Share

    Recommendations

    • Magnets Challenge

      Magnets Challenge
    • Snow Challenge

      Snow Challenge
    • Wearables Contest

      Wearables Contest

    13 Discussions

    0
    TelfTheElf
    TelfTheElf

    10 months ago on Step 3

    Hey man, those lil' pallets are the way forward. and so is the rest of your stuff.

    0
    BigAndRed
    BigAndRed

    3 years ago

    This is a neat, well presented instructable.

    I will have a go at making this but with off cuts so 1 pallet at a time not all at once.

    0
    SherylinRM
    SherylinRM

    3 years ago

    Cool idea

    Thanks for this :)

    0
    lglira
    lglira

    3 years ago

    nice

    0
    fs woodworking
    fs woodworking

    Reply 3 years ago

    Thank you.

    0
    TheRealChanga
    TheRealChanga

    3 years ago

    https://www.instructables.com/id/Mini-Pallet-Style-Drink-Coasters/?ALLSTEPS

    0
    fs woodworking
    fs woodworking

    Reply 3 years ago

    Nice work. Thanks for sharing.

    0
    WoodCrafts 67
    WoodCrafts 67

    3 years ago

    Nice I like them a lot would look great on any table. I might make some for my table if you don't mind...

    0
    fs woodworking
    fs woodworking

    Reply 3 years ago

    Hehe. go ahead. if you need any help let me know. Will be happy to help.

    0
    WoodCrafts 67
    WoodCrafts 67

    Reply 3 years ago

    Thanks Mate. Much Appreciated..

    0
    Yonatan24
    Yonatan24

    4 years ago

    Those are so cute! I think i've seen someone make these already on Instructables