DIY PVC Pipe Woodwind Instrument

867

1

Introduction: DIY PVC Pipe Woodwind Instrument

How to make a PVC pipe woodwind instrument.

You need:

1) PVC pipe

2) Woodwind Mouthpiece

3) Drill

4) marker

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Holes

First, draw holes with your marker on where your fingers are going to go. MAKE SURE your fingers fit comfortably.

Step 2: Drill

Drill in the holes, in where you marked. Make sure they are not too big, in where your fingers dont cover the hole properly.

Step 3: Mouthpiece

Get a mouthpiece. I got a 3D printed mouthpiece! Then put it into one side of your PVC pipe. and blow!

Step 4: Tune the Instrument

Now you just need to tune it! Good luck!

Be the First to Share

    Recommendations

    • Sew Fast Speed Challenge

      Sew Fast Speed Challenge
    • Fandom Contest

      Fandom Contest
    • Jewelry Challenge

      Jewelry Challenge

    Discussions