DIY Turntable Lazy Susan

Introduction: DIY Turntable Lazy Susan

About: I enjoy making new Instructable

I am making diy turntable also called lazy susan for making a 360 product photography as it's good choice

It could be motorised as well if attach a motor with it ,it will become showcase as well

I have use basic items for this project if you don't understand something please watch the video and please vote for this project

Step 1: Things We Need

cpu fan

8 x 8 round cutted mdf one side white lamination

speaker magnet

7x7 wooden board

4x 1.5'' screws

cotton thread

Step 2:

Place the fan in center of the board and tight it with screws

put hot glue over the fan and place a magnet over it and then same with the mdf board

Place a hot glue in bottom side of the mdf piece and place a one side of thread in that ,rotate the wheel and roll the thread over a magnet ,place any product over it and slowly pull the thread it will also rotate the product as well.

please watch the video and vote for this project

Woodworking Contest

Participated in the
Woodworking Contest

Be the First to Share

    Recommendations

    • Puzzles Speed Challenge

      Puzzles Speed Challenge
    • "Can't Touch This" Family Contest

      "Can't Touch This" Family Contest
    • CNC Contest 2020

      CNC Contest 2020

    Discussions