DIY Tutorial - How to Make Brass Bracelet & Gold-Foiled Resin

501

14

1

About: HappyJewelrySupplies exclusively making your jewelry supplies and affordable customizations!

Intro: DIY Tutorial - How to Make Brass Bracelet & Gold-Foiled Resin

Tools and materials:

AB resin glue, glass balls(2 sizes), golden gold foil and rose gold foil, brass piece, letter stamp, metal crafting tools, measuring tools, tweezers, pliers.

Step 1: Bracelet Designing

Draw out the design of the bracelet and you shall be aware of the materials and sizes.

Step 2: Letter Crafting

Pick one piece of brass and locate its center-position for marking. Choose the stamps of the letters you want and place the brass piece onto the platform. The stamps will face the surface of the brass and we will use hammer to hammer the other end of the letter stamps, which will make the letters crafted onto the brass piece.

Step 3: Heating and Cooling

Place the brass piece onto the heating platform and heat the brass to soften it. Cool it off in the water.

Step 4: Bracelet Making

The softened brass piece will be bent and do circle onto the bracelet mould. Hammer it with soft hammer to adjust its shape of a bracelet.

Step 5: Bracelet Cleaning

The brass bracelet will be put into the machine to clean off the dirt.

Step 6: Comparing

The cleaned brass bracelet will be compared to the chosen glass balls.

Step 7: Glue Mixing

The proportion of the A glue and B glue will be 3:1 and we will do measuring about the amount. Stir and mix up the A glue and B glue evenly and wait for 10 minutes so the bubbles will disappear.

Step 8: Decoration of the Glass Balls

Pick different foils of different colors and put them into the glass balls mixing.

Step 9: Mould In

Use tools to pick up the glue and put them into the decorated glass balls for 90 % full. Be aware that you shall not fill up the glass balls to leave some space so the end of the bracelet could be fixed into. 12 hours for the glue to dry up.

Step 10: Combining

Make some glue for back up. The space of the glass balls shall be filled with glue and we will plug the brass bracelet into the glass balls and adjust its position well. Use tools to fix the position well and wait for 12 hours for the glue to dry up.

Step 11: Complete!!

In this video, making a brass bracelet with "LOVE" letters, making a pair resin glass bottles with gold-foiled.

Simple lines make the shape of the brass bracelet wonderful and it is quite with a fresh feeling with the gold foil glass balls. These 2 elements are perfectly matched and with good characters. Hope you will like it!

Facebook: HappyJewelrySupplies

Instagram: HappyJewelrySupplies

Our Website: www.happyjewelrysupplies.com

Share

    Recommendations

    • Halloween Contest 2018

      Halloween Contest 2018
    • Metalworking Contest

      Metalworking Contest
    • Fix It! Contest

      Fix It! Contest

    Discussions