Hello friends, in this video I will show you Very Simple and Amazing Project. It really simple and easy to make it at your home. DIY Water Pump or Valve Auto ON-OFF | Make Water Level Controller at Home. Order this project from PCBWay - http://bit.ly/2kxA4QD
Get 10 PCBs for Only $5! PCBWay - https://www.pcbway.com
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Video Tutorial - Step by Step
Required Hardware for this project:
Water Pump 12V - http://bit.ly/2m0IksI
Solenoid Valve 12V - http://bit.ly/2kxCfUc
Relay 12V - http://bit.ly/2kA70b4
Diode 4007 - http://bit.ly/2k9HWHY
Transistor BC547 - http://bit.ly/2kpeZbd
Resistor 1K - http://bit.ly/2lJhi8Z
Adapter 12V - http://bit.ly/2m2GCHj
Battery Connector - http://bit.ly/2lEhoPk
Wires - http://bit.ly/2kAu9dF
Wire Connector - http://bit.ly/2lEgy58
Tube Hose - http://bit.ly/2k5qnbU
Soldering Tool Kit - http://bit.ly/2D6YbuC
Four Arms Soldering Station - http://bit.ly/2kygjsc
Banggood 13th Anniversary Sale - http://bit.ly/2kmNIpP
Step 2: Order PCB From PCBWay
In this project, I have choosen PCBWay. PCBWay is the only way to make this project happen a very low cost and high quality.
Order this project from PCBWay - http://bit.ly/2kxA4QD