DIY Wings for Your Shoes (shwings)




Introduction: DIY Wings for Your Shoes (shwings)

You can make your own cheap shwings. It's very easy! But you need to know how to sew. You can make them look like you want. (I'm sorry for the bad English...please correct me :D, this is also my first instructable and I am open for advice)

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Things You'll Need

- fabric of your desired colour
- yarn of your desired color
-pencil or something that writes on fabric and paper( I recommend pencils because you can erase your mistakes)
-perforater or something to punch holes

Step 2:

Draw a template on the paper or find one on the internet. Make sure that it is not too big or too small for your shoes. Mark the points where the holes for the shoelaces.are. Cut it out.

Step 3:

Draw around the template on the fabric and cut it out. You'll need at least two pieces that you sew together. Don't forget to mark the holes for the shoelaces.Then. you can use the perforater to make the holes.

Step 4:

Now you take the yarn with the needle and start to sew the two pieces together but let one side open.

Step 5:

You can fill it with cotton or what you want than sew the last part together.

Step 6: You Are Finished!

Now put the wings on your shoes and fly around ;D

Be the First to Share


    • Cardboard Speed Challenge

      Cardboard Speed Challenge
    • Sculpting Challenge

      Sculpting Challenge
    • 3D Printed Contest

      3D Printed Contest