DIY Leather Card Holder

10,417

126

3

About: Fairgoods is an online shop that sells a curated selection of accessories, housewares, apparel, decor, and type — with a focus on goods that use type. For more DIYs, visit our blog: blog.fairgoods.com.

Make a cool letter stenciled leather card holder

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: What You'll Need

Supplies:

Ne10 Stencil, scissors, a Sharpie fine marker, a scrap piece of matte leather, masking tape, and a sewing machine. (Your sewing machine should have a heavyweight needle and heavyweight thread for this project.)

The leather you use for this should be matte and not glossy in finish (it will hold the text better). You can usually buy scrap pieces at your local leather supplier cheaply.

Step 2:

Draw a rectangle on the piece of leather that is 3 inches by 7 inches, and cut out using a pair of sharp scissors.

Using your Sharpie, fill in your alphabet letters. Use a piece of masking tape to help keep things straight.

Step 3:

Fold your leather almost in half (you can use a business card to help figure out where the fold should be). Leave the back side a little higher than the front — this will make it easier for you to take out your cards while still keeping them protected.

Step 4:

Take your leather piece to the sewing machine and sew up each side.

Step 5:

Now you have a fancy new card holder! I really like the black-on-black look with  brightly colored thread as an accent, but the options are endless for colors. Just remember to use a matte leather and have lots of fun.  Create your own version and share yours in the comments below.  Happy creating!  


Be the First to Share

    Recommendations

    • Book Character Costume Challenge

      Book Character Costume Challenge
    • Made with Math Contest

      Made with Math Contest
    • Multi-Discipline Contest

      Multi-Discipline Contest

    3 Discussions

    None
    jgoff3

    5 years ago

    hm, I used a box and put leather inside n' out.

    Cool idea, you could have a better result by reversing it so the sewing would be in the inside ; )