All I need is to remove this remote control and see what I can do.
A FLAT SCREWDRIVER
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: REMOTE CONTROL'S ANALYSIS
THE REMOTE CONTROL IS NOT BROKEN. IT IS IN WORKING CONDITION.
Step 2: REAR APPEARANCE OF THE REMOTE CONTROL
Step 3: REMOVE THE COVERS
FIRST, I REMOVED THE LOWER COMPARTMENT COVER AND THE REAR COVER TO SEE THE REMOTE CONTROL'S INTERNAL MECHANISM AND HOW IT WORKS.
Step 4: 5 PARTS
I saw the battery socket and two opposing conductive springs. Then I pulled the front side of the RC and the mechanism inside apart with the help of a flat screwdriver.
With the keys that are called button contact and the printed circuit board, there are 5 parts in total that make up the RC.
Step 5: BATTERY SOCKET
Step 6: BUTTON CONTACT & PRINTED CIRCUIT BOARD
There are LED lights and microchip on the front side of the printed circuit board.
ON THE BACK SIDE THERE IS A CAPACITOR.
As a conclusion;
Firstly, it was an enjoyable activity and experience for me. I did not have any difficulty with disassembly in general, yet my curiosity and interest have increased. During this practice, I learned the names and function of many components that I never knew of.