Display CDs on Wall

Introduction: Display CDs on Wall

I'm working on a collection of CDs and I wanted a good-looking, cheap way to display them. After some thinking and experimenting I came up with this. You can hang about 14 CDs for $15.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Materials and Tools

Materials:

-closetmaid shelftrack (can be found at home depot, comes in different lengths)


Tools:

-drill

-drill bits

-screwdriver

-screws

-dremel

Step 2: Drill the Holes

Drill a couple holes in the shelftrack for mounting. Go through both sides so you can put the screw in and be able to screw it with the screwdriver. After you drill the holes you'll have some edges on the inside of the shelftrack, just use a dremel with a cutting wheel to get rid of it. MAKE SURE TO USE SAFETY GOGGLES WHEN DOING THIS . I'm not responsible if you get pieces of metal embedded into your eyes.

Step 3: Mount and Display

Now just put the screws in the holes and screw into the wall. Just add CDs now and enjoy :)

Be the First to Share

    Recommendations

    • Sculpting Challenge

      Sculpting Challenge
    • 3D Printed Contest

      3D Printed Contest
    • Motor Vehicle Contest

      Motor Vehicle Contest

    3 Discussions

    0
    musick_08
    musick_08

    Reply 9 years ago on Introduction

    lol yeah, cinder blocks and plywood. I just put it there to demonstrate it, but when i get more of the shelftrack im gonna put it on my wall