Diy Wood Engraving CNC Router

My first Wood Engraving CNC Router of 300 x 300 mm size and z axis travel length is 65 mm

Material :

• Aluminum frame with size 300 x 300 mm ( inside area of the frame)
• Arduino uno
• CNC shield
• Trapezoid screw 100 mm ( 01 no )
• Threaded screw or trapezoidal screw 500 mm ( 2 no. )
• Smooth rod ( 4 no.)
• LM8uu or SU8uu
• Nema 17 ( 3 no.)
• Motor 12V
• Mini chuck
• Drill bits

Step 1:

Step 2: My First Diy Wood Engraving CNC Router 300 X 300 Mm

Material Aluminum panel ( usually used in window panel )

Base Frame size. 480 x 500 mm ( inside area of the frame)

Step 3: Arduino UNO and CNC Shield V 3.0

Arduino UNO and CNC shield

Connection:

• Nema 17 ( 03 No's )
• Motor 12V , 30,000 r.p.m ( 01 No's )
• Adaptor 12V ( 02 No's )
• USB cable ( 01 No's)

Step 4: Sample of Wood Engraving CNC Router of Letter C of 20 Mm

Sample of wood engraving CNC router of letter C of 20 mm

Step 5: Second Sample of Letter E ( Pocket Inlay )

Second sample of Letter E letter size 20x 35 mm

Step 6: Z Axis

z axis

Travel length 65 mm