- 12 pentagons
- 5 bases
- 60 fitting parts
- 1 lamp 15w
- 1 plug with switch on/off button
- 1 mdf board size A2.
Step 1: Get the Pentagons
Download the .dwg file with the draws you will need.
Cut the mdf board in a lasercut machine to get the parts you need.
Step 2: Join the Pentagons
Use the fittings parts to join the pentagons and form a dodecahedron.
Step 3: Set the Base
Put the lamp in the plug and fit to the pentagonal base.
Step 4: Done!
Enjoy your lampshade! :D