Introduction: Dollar Bill Ninja Star
You will need 2 one dollar bills to make this star. You can use the green side, black side or a combination of the two. The photos show the front and back of stars in these three combinations
Step 1:
Fold the bottom edge up to the top edge and crease
Step 2:
Fold the left side over to the left and make a crease in the middle of the bill
Step 3:
Fold the right hand end DOWN along the middle crease. Fold the Left hand edge up as shown
Step 4:
Turn the bill over. Fold the right hand end up and the left hand end down
Step 5:
Fold the extra tab ends down and up as shown. Set this aside. This is part one.
Step 6:
Take second bill and repeat steps one and two.
Fold right hand end up and left hand end down
Step 7:
Turn the bill over. Fold right hand end down and left hand end up. Fold tab ends up and down. Turn this piece over. This is part two.
Step 8:
Place part two on top of part one.
Step 9:
Fold left hand part of part one under part two
Step 10:
Fold right hand end of part one under part two
Step 11:
Turn the assembly over and tuck the right hand end of part one under as shown
Step 12:
Tuck left hand end under the right hand point as shown. Your star is complete