Dorm Room Christmas Tree

2,430

41

7

Introduction: Dorm Room Christmas Tree

Step 1: Gather Supplies

You will need:
•Green and red LEDs
•Soldering iron
•9 volt battery
•Switch
•Tweezers
•Solder

Step 2: Switch

Solder one wire from the switch to the negative terminal. Make sure the other end doesn't touch.

Step 3: LEDs

One by one, solder the LED's ground wires to the other end of the switch. Bend the positive wires back and leave them alone.

Step 4: Arranging

Solder the lights so that there is three in the bottom, two in the middle and one red on the top.

Step 5: Positive Wires

Connect all the positive wires and solder them directly to the positive terminal. Make sure that wires aren't touching.

Step 6: Done!

Merry Christmas

Hardware Hacking

Participated in the
Hardware Hacking

Make It Glow Contest

Participated in the
Make It Glow Contest

Supercharged Contest

Participated in the
Supercharged Contest

Be the First to Share

    Recommendations

    • Puzzles Speed Challenge

      Puzzles Speed Challenge
    • "Can't Touch This" Family Contest

      "Can't Touch This" Family Contest
    • CNC Contest 2020

      CNC Contest 2020

    7 Discussions

    0
    laffinm
    laffinm

    6 years ago

    Right you are!

    0
    Ryhorn12
    Ryhorn12

    6 years ago

    I saw that on iFunny

    0
    Grunambulax
    Grunambulax

    6 years ago on Introduction

    I can't wait to see what presents you hide under there.

    0
    lunakid
    lunakid

    Reply 6 years ago on Introduction

    Hehe, whatever it is, must be SMD. Or even something nano.