Duct Tape Phone Case

Super Easy and i think very handy phone case made out of DUCT TAPE

Step 1: Base of Your Tape

Make a piece of Duck Tape® fabric that is 3 in. wide and twice as long as the length of your phone.

Step 2: Making the Shape

Cut out a strip at one end of your fabric. Make it as similar as you can to the picture.

Step 3: Add On's

Make another piece of Duck Tape® fabric that is about 3 in. long and 3 in. wide.

Step 4: The Spine

Make a double sided strip of tape that is slightly longer than 3 in.

Step 5: Were Almost Done

Lay the strip over the piece from step 3, folding over the excess tape over and taping it on the other side.

Step 6: Last Step

Take your fabric from step 2 and fold the bottom up to create a pocket. Use pieces of tape to secure the sides.

Attach the piece you created in step 5 to the outside of your phone case.For a loop

Step 7: Your Done

Make sure you phone case closes properly. Add a hook and loop fastener for added security if desired.

Viola your done this has protected my phone many many times i hope it works for you