EASY T-SHIRT PRINT WITH LUMI

Introduction: EASY T-SHIRT PRINT WITH LUMI

About: Kenya’s first open makerspace for design and rapid prototyping.

Makers from the Gearbox- A makerspace in Nairobi decided to do the Lumi build Night on a nice warm Saturday afternoon where we had a couple of T-shirts.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: MATERIALS

This is what you need to design print you T-shirt using Lumi:-

-A clean plain Bright color t-shirt
-Lumi Starter Kit
-Cardboard
-Black tape

Step 2:

Take the shirt and place a cardboard underneath. This is to ensure that shirt is still. Get started by placing the lumi Inkodye bottle with the roller.
Apply inkodye gently only to the area estimated to fit the negative film of your preffered photo.

Step 3:

Attached your photo gently using the tape to hold the photo well. Ensure that you cover all parts that have the dye, otherwise they will affect on your T-shirt.

Step 4:

 Place your shirt outside for 10minutes on a sunny afternoon. You should see it changing color.
Remove the film and wash with hot water. Ensure that you add inkowash while washing.

Step 5:

Finally the t-shirt after handwashing and drying!

Be the First to Share

    Recommendations

    • Sew Fast Speed Challenge

      Sew Fast Speed Challenge
    • Fandom Contest

      Fandom Contest
    • Jewelry Challenge

      Jewelry Challenge

    Discussions