Introduction: Easy Ceiling Stars
A fast way to add "Stars" to your ceiling, well at least a part of the ceiling.
For this project we will be using "Chibitronics".
- LEDs (I used around 24)
- Effects Add-On sticker (I used Twinkle and Fade Stickers)
- Copper tape (I used 2)
- 3v Power Source (old charger)
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Stick as many LED stickers as you want on the ceiling.
Stick Effect stickers on the ceiling.
Start making a way from the 3v power source (battery, charger) to LEDs and Effect stickers.
Connect the negative "-" terminal of the power source to all LEDs and Effect stickers.
Connect the positive "+" terminal of the power source directly to LEDs or via Effect stickers.
If your LEDs are connected via Effect stickers, they will light up with an effect. In my case - twinkle or fade.
So at the end I had 3 types of "stars". Ones that shine, twinkle and fade.
Connect everything to the 3v power source and enjoy the show.