Introduction: Easy Fire Starter Fan/blower
This is a quick way to start a good going fire without having to fan by hand.
Step 1: Pvc Pipe
3/4 inch pvc pipe cut into just under 2 feet
Step 2: Duck Tape
and some duct tape
Step 3: Cover
cover the end with duck tape.
a few layers will be good and make sure there is no
way for air to come out the sides
Step 4: Hole
make a little hole in the tape.
Now your done just blow into the end for a quick and easy fire.
coals = around 12 mins to complete heat
now cut that time in half.
Participated in the
Outdoor Cooking Challenge 2016