Introduction: Easy Own Construction Glasses Holder
Materials:
a piece of shelf
2 small screws
stitch saw
paper
pencil
scissors
sandpaper
drill
Step 1: Preparation
Draw a nice tiki silhouette like i do on a piece of paper and cut it out with a scissor. Mark it on a pieces of shelf and saw it with a stitch saw. Smooth the edges with a piece of sandpaper. Mark a base on a piece of shelf and cut it with the stitch saw. Smooth the edges with sandpaper. Center 2 spot for the skrews in the head and drill small holes. Mark the holes on the baseplate and drill them. Drill the underside of the base with a sinker drill.
Step 2: Finish
Screw the base and the head together and have a nice place for your glasses.
Look at my other work.
