This is an instructable for a very easy pen holder.
Step 1: What You Need:
For this project, you'll need the following:
+ Lots of colour pencils.
+ A hot glue gun.
+ An empty bottle.
+ Standard project stuff like a pair of scissors, a marker, etc.
Step 2: Cutting the Bottle:
Cut the plastic bottle in half.
Step 3: Preparing the Pencils:
Measure out 6.5cm from the bottom of each pencil.
Saw each pencil along the 6.5cm line.
I used a mitre saw to speed up the process.
Step 4: Glueing the Pencils:
Use the hot glue gun to glue the pencils around the water bottle.
Step 5: Done!
And that's it! You're done!
Thank you for your time!