Introduction: Eco Energy Shoes:-Mobile Charging,Instant Feet Massager,Wet Sensor
Eco Energy Shoes is the best choice for the present scenario .As it provides Mobile Charging,Feet massager and it also have the ability to sense the water surface .This whole system uses free source of energy.Hence appropriate to use.
STEP TOWARDS SUSTAINABILITY IMPLANT FUTURE
Step 1: MATERIAL REQUIRED
2. Piezo transducer
3.Harvesting module(you can also use the module of your old power bank)
5. Soldering iron
6.Hot glue gun
9.Double side tape
Step 2: Fix Piezo Transducer
Take a piezo transducer and stick them over the shoe base and connect them accordingly.
Step 3: Wet Sensor
Now time to fix the buzzer over the shoe and which become sensitive when shoe sole come in contact with wet surface
Step 4: Feet Massager
Now take the mini vibrating motors and place them over the end surface of shoe and further connect it with the switch
Step 5: Fix the Module and Battery
Now attach the Harvesting module in the shoes and then connect it to the battery
Step 6: It's Ready to Use
After connecting all the wires properly it's is ready to wear. Walk and generate electricity.