Emergency Light Design With Recycled Materials Led

42

2

About: Blog dedicated to sharing information about electronics, automation, programming, arduino and more.

Hello friends, how are you? Today we will learn step by step how to make an emergency light with reusable materials.

applications

Emergency lights or luminaires are very useful for locating us when there is a power outage and do not stay in the dark and cause accidents. These emergency lights can be installed near doors and emergency exits etc.

connections

In this example as in the video we assemble one from pieces of scrap as 12v source of old equipment and burned lamp Leds, in fact those burned lamp Leds can be used for other purposes.

The design has a demonstrative character but as an option to obtain a better aesthetics would be to insert it inside the switch passage box and with the aid of a drill make a small hole to pass the led wires.

The source can be disassembled to save space inside the box and filled with hot glue to avoid short circuits. So only the LEDs are outside.

I hope you like other tutorials go to BlogSilvatronics

Supplies:

1 source 12v
1 relay 12v

1 9 v battery

1 battery clip

1 Bar of 3 Leds (removed from burned led lamp)

We also use glue, tape and tin for assembly.

Step 1: Conections

Share

    Recommendations

    • Growing Beyond Earth Maker Contest

      Growing Beyond Earth Maker Contest
    • Fandom Contest

      Fandom Contest
    • Sensors Contest

      Sensors Contest

    2 Discussions