Introduction: Extended Dioder Remote Cord
Step 1: Supplies
2 cat5 jacks
Cat5 cable at desired length
Dioder set for ikea
Step 2: Cut
Cut the plug end off of your dioder remote and strip off 1/4 inch of the exterior casing. Push the 5 wires into pins 1-5 of one of the cat 5 jacks. Do the same for the opposite end of the remote.
Step 3: Connect
Connect the two pieces together with your cat5 cable
Step 4: Rout Cable
Route the cat5 cable as you desire and keep it hidden.