Hope you have fun making a sign
Step 1: Make an Easel Design
Figure what you want your sign to say. Then make it.
Step 2: Find 2 Boards
You can use really any kind of wood i used pine. My sign is 24 by 18in
Step 3: Biscuit 2 Boards Together
Cut the grove for the biscuit. Place a decent amount of glue on. Then place the biscuit in the grove and place plenty of clamps on it.
Step 4: Burn With a Torch
You burn the board with a torch so it gets a real nice look
Step 5: Engrave Your Design on the Board
Make the design of what you would like it to say
Step 6: Poly the Board to Finish It Off.
Put 3 coats on the board by brushing it on.