Hi, we are Lore, Yorick and Manou.
For an assignment for school we had to design a fire installation. First of all we started to freely brainstorm of what already existed or what we first thought about hearing the word 'fire'.
Soon we realized that we wanted to create something that encourages people to come and play with our installation. Because of the fact that the target audience is very spread (from young to old), we had to find something that’s pleasant for everyone. We opted for a gift! A gift that you get when you win the game. What you need to do is hit the button with the hammer. This hit will create a flash fire that needs to burn a string. Because the gift is hanging on that string, the present drops when the flame is high enough. As additional there will be also a wonderful smell of fresh baked cookies.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Materials
What you need to make a fire knock.
Step 2: Hole
Drill a hole in the beam.
Step 3: Connect Two Beams
With the welding device, you can connect beam b and c.
Step 4: Preparing Beam A
Step 5: Connect Beam a With the Rubber
Step 6: Create a Hinge Between Beam a and Beam B
Step 7: Woodlock on D
Step 8: Create Holes on the Right Place
Step 9: Preparing the Knockblock
Step 10: Create the Lever
Step 11: Saw Holes in the Cover
Take a hacksaw
Step 12: Fix the Shaft
Step 13: Fix the Cover
Step 14: Part Two, the Glass Hut
Start by drilling holes on the right place
Step 15: Fix the Glass Clip
Step 16: Create the Chassis
Step 17: Create the Glass Hut
Step 18: Fix the Glass
Step 19: Fix the Flour Sieve
Step 20: Fix the Knockblock With the Glass Hut
Step 21: The Fire Knock Is Ready